In October the International exhibition center, which is located in Kyiv, brought together supporters of weapon. State enterprise Scientific and Technical complex “Precision Mechanics Plant” also took part in ХV International specialized exhibition «Weapon and safety – 2018», which was held from 09 to 12 October 2018.
From July 3, 2018 Nikulin Alexandr Panasovich was appointed Director of the State Enterprise “Scientific-Technical Complex” Precision Mechanics Plant”.
Chursin Alexander Alekseyevich, head of the Armored Equipment Division of the State Concern “Ukroboronprom” presented the new head.
Having experience in the field of organization of enterprises, Alexander Panasovich actively continues work on the support and promotion of the precision mechanics factory market.
November, 24, 2017
On November, 17 in 2017 The State enterprise Scientific and Technical complex “Precision Mechanics Plant” before the appointed time shipped a state enterprise duty party of cannons to soldiery parts of Department of Defense of Ukraine, what fully performed with passing of terms the Government defensive order on 2017.
From 10 to October, 13 in city Kyiv the ХІV International exhibition passed “Weapon and safety – 2017”. This exhibition offered products over 400 companies from 15 countries of the world in two spheres: armament and military technique for an army and law enforcement authorities and weapon for citizenry, that took place in pavilions and on outside of the International exhibition center court.
In the United States of America, in city Washington from 9 to October, 11 in 2017 the international exhibition of armament of “AUSA-2017” took place, that contained more than 600 representatives of state and private corporations from the sphere of defensive.
From September 5 to 8, 2017, the International Exhibition of Defense Industry “MSPO-2017” was held in Kielce, Poland. ST STK “Factory of Precision Mechanics” took part in this event.
On August 15, STC “Precision Mechanics Plant”, which is part of the State Enterprise “Ukroboronprom”, celebrated its 21st anniversary.
The next batch of the new MPC-ZDA armored personnel carriers which are produced by State Enterprise “Kiev Armour Plant” has successfully passed one of the steps of acceptance tests at one of the military firing ranges in Kiev region before transfering to The Armed Forces of Ukraine. During this test step the accuracy of firing and the work of the combat module “Shturm-M” were verified. The Press service of “Ukroboronprom” reports about it. Continue reading “In Ukraine it has been shown the recent MPC-ZDA armored personnel carrier equipped with the PMP-1 gun.”
The combat modules “Shkval” and “Stilet” passed the comparative factory tests at one of the military firing ranges in Zhytomyr region.
These modules are intended for arming of the backfitted IFV engineered in the State Enterprise “Zhytomyr Armored Factory” which is a part of the SE “Ukroboronprom”. Continue reading “The fiery tests with the involvement of PMP-1 and PMP-2 main guns on the combat modules “Shkval” and “Stilet” for the IFV.”
19-23 February 2015 State Concern “Ukroboronprom” presented Ukraine at the International exhibition of military equipment«IDEX-2015″. The delegation was led by Director General of Concern Roman Romanov and the National Security Council Deputy Secretary Oleg Hladkovskyy.
IDEX (The International Defense Exhibition and Conference) 2017 is an international exhibition of defense industry, one of the biggest in the world and the largest in the Middle East and North Africa. The first exhibition took place in 1993 and since then it is held regularly every two years. IDEX gathers professional soldiers, global leaders and journalists. Continue reading “PMP at the biggest international exhibition of defensive arms in Abu Dhabi “IDEX-2017””
Publishers interested in Khmelnytsky now “Precision Mechanics Factory” taking detailed interview the director of the plant Miroslav Khalika! More details can be found here: Continue reading “About us Khmelnytsky media”
With the excellent organization and high quality of work, personal contribution to the development of the company, rational approach to governance and professionalism in nominatsiyiyi “Leader 2016” won the Director of “STC” Fine Mechanics Plant “- Miroslav Khalik!
Workers and factory administration genuinely proud of their director and express their congratulations.
A. Miroslav Khalik led the State Enterprise “Scientific-Technical Complex” Plant Precision Engineering “year and a half ago. An indication of his professionalism were right the first months of operation, for which the company repaid wage arrears to workers and deployed all the power at work.
It should be noted that the state defense order for the number of products in 2016 was the largest ever orders from the Ministry of Defense of Ukraine. In addition, the company reported a willingness to fulfill the state order for 2017 as early.
As a result of good work, and responsibility of leadership through decisive action, SE “STC” Fine Mechanics Plant “in 2016 produced nearly 250 guns and ZTM1 ZTM2 and about one million units units of various modifications. Thus, the plant provided the Department of Defense of Ukraine and enterprises of the defense industry in its entirety.
State Enterprise “Scientific-Technical Complex” Fine Mechanics Plant “was awarded the national certificate confirming that the resulting ranking full range of economic entities of Ukraine, according to financial-economic indicators, the company was awarded the honorary title” STATE ENTERPRISE OF THE YEAR – 2016 “. Continue reading “According to official data of State Statistics of Ukraine SE “STC” Fine Mechanics Plant “now recognized as the best state in 2016.”
December 5, 2016 SE “STC” Fine Mechanics Plant “shipped last batch of guns to military unit Ukraine, the fully completed ahead of deadlines state defense order for 2016.
It should be noted that the number of articles on the state defense order in 2016 was the largest ever orders from the Ministry of Defense of Ukraine. In addition, the company reports on readiness to fulfill the state order for 2017 as early.
As a result of good work, and responsibility of leadership through decisive action, SE “STC” Fine Mechanics Plant ” for 11 months 2016 year has produced nearly 250 guns and ZTM1 ZTM2 and about one million units units of various modifications. Thus, the plant provided the Department of Defense of Ukraine and enterprises of the defense industry in its entirety.
November 10, in Kamenets held VII-th International Investment Forum “Development of the industrial potential of the city.” The event was held with the participation of foreign delegations, international organizations, embassies and consulates, major industrial enterprises. Continue reading “SE “STC” Fine Mechanics Plant “took part in VII-th International Investment Forum”
From 2nd to 5th November 2016 in. Jakarta, Indonesia, was held exhibition “INDO DEFENCE-2016 Expo & Forum”. On the stand of SC “Ukroboronprom” was presented products SE “STC” Fine Mechanics Plant “, namely, automatic guns and ZTM1 ZTM2, link L-30-1, products made anti-tank missile system, air guided missiles, radar stations, mortars, modern armored vehicles the latest fighting modules, and a unique transport aircraft AN-178. In general presented 37 exhibits from 16 companies participating “Ukroboronprom.” Continue reading “SE “STC” Fine Mechanics Plant “presented on the exhibition” INDO DEFENCE-2016 Expo & Forum “(c. Jakarta, Indonesia).”
From 11 th to 14 th October in Kiev the exhibition “Arms and Security”. SE “STC” precision mechanics factory that is part of the SC “Ukroboronprom” traditionally takes part in the event. As always, the company presented two automatic guns and ZTM1 ZTM2 and links L-30, L-30-1. Production of these products is currently the largest and widest in Ukraine. Continue reading “The exhibition “Arms and Security-2016”. Presentation combat module “Doublet””
September 27 in the city. Baku (Azerbaijan Republic) opened the second international exhibition of defense industry «ADEX 2016 ‘. Continue reading “SE “STC “Fine Mechanics Plant” presented at the exhibition ADEX-2016″
September 10 in the city of Zhitomir in celebration of the Day of the tanks held a football tournament involving State Enterprise “STC” Fine Mechanics Plant “. The event traditionally made “Zhytomyr armored plant”, which each year brings together 11 companies and team of state concern “Ukroboronprom.” This year the team SE “STC” Fine Mechanics Plant “showed twice better result than in the previous 2015, namely the sixth place in the ranking table. Continue reading “Achieving new records”
1 September in the Polish city of Kielce hosted an international exhibition of defense industry MSPO-2016. State Enterprise “STC precision mechanics factory” in the SC “Ukroboronprom” for the first time participated in this event, which demonstrated the following examples of products: Continue reading “SE “STC” ZTM” at the international exhibition “MSPO 2016” Poland”
For the second consecutive year Vykonachyy Committee Kamenetz-Podolsk City Council, represented by Mayor Michael Simashkevycha awarded director SE “STC” Fine Mechanics Plant “Khalika Miroslav Alexandrovich diploma: Continue reading “Diploma Director of “STC” Fine Mechanics Plant “Miroslav Haliku of Mayor Kamenets”
August 29, chaired by the Director General of Civil «Ukroboronprom” Roman Romanov. held celebrations to mark the 5th anniversary of the State Concern “Ukroboronprom” on the territory of the State Enterprise “Kyiv armored plant.” The event was attended by Secretary of the National Security and Defense of Ukraine Oleksandr Turchynov, Minister of Defense of Ukraine Stepan Poltorak, Commander of the National Guard of Ukraine Yuriy Allerov, NSDC First Deputy Seretarya Michael Smith, Chief of the Armed Forces Nikolay Shevtsov arms. Continue reading “Director General SC “Ukroboronprom” said Miroslav Khalyk award”
August 24 in the capital held a parade to mark the 25th anniversary of Independence of Ukraine. More than three and a half thousand troops, more than two hundred units of a powerful military technology and almost half of them were completed products of the State Enterprise “Scientific-Technical Complex” Fine Mechanics Plant “. Look on the military might of the homeland and congratulate ATU heroes gathered thousands of Kyiv residents and guests. The parade for the 25th anniversary of independence of Ukraine called the largest in state history. We are proud that the quality and reliability of our products is recognized not only in his native country but in the world as a whole. Continue reading “Military parade for the 25th anniversary of Independence of Ukraine took place involving products “Fine Mechanics Plant””
August 15 SE “STC” Fine Mechanics Plant “, which is part of the GC” Ukroboronprom “celebrated its 20th anniversary with a full load of its production capacity and production volumes record. To celebrate this event, employees, veterans and guests gathered in the factory Kamenetz-Podolsk district center of culture and arts “Rozman”. Solemn celebration of the beginning of the performance of the municipal brass band director is Yuri Sharkevich. Continue reading ““Plant of Precision Mechanics’ celebrated its 20th anniversary”
August 15, Kamenetz-Podolsk – SE “STC” Fine Mechanics Plant “, which is part of the SC” Ukroboronprom “celebrates its 20th anniversary at its full load capacity and record production volumes. Head of the company is proud to demonstrate the power plant and samples fabricated technology leadership and Khmelnytsky DC “Ukroboronprom” and will present awards to the best employees for their valuable contribution to the development of the plant. Continue reading ““Producer guns for Ukrainian army celebrates its 20th anniversary””
In France, the exhibition center «Paris Nord Villepine» near Paris is one of the largest international exhibition of armaments and defense technologies of ground and air destination Eurosatory-2016, which involved nearly 140 countries. Continue reading “The success and signed memoranda SE STC “Fine Mechanics Plant” at Eurosatory-2016, Paris.”
The exhibition Defexpo -2016, which was held in the South Goa, India, concluded recently. Ukrainian delegation conducted 8 successful negotiations with Ministry of Defence Government of India and highest command of Indian Armed Forces and more than 30 leading companies-manufactures of military and specific purpose products. Among them : Reliance Defence Limited, Tata Power Company Limited, Punj Lloyd, Larsen Turbo. Continue reading “Results and Outcomes of Negotiations on the Exhibition Defexpo-2016,India”
The Scientific-Technical Complex “Precision Mechanics Plant” participated in one of the largest international military weaponry exhibition Defexpo 2016, which was held not in the capital of India,Delhi, but in the suburb of Quitol in the South Goa, India. Continue reading “The Scientific-Technical Complex “Precision Mechanics Plant” on the Exhibition Defexpo 2016”
The very first Investment Forum in the field of the defense industry opened 18 February, 2016.
A joint meeting of representatives of the Ministry of Education and Science of Ukraine and the State Concern “Ukroboronprom” took place February 12, 2016 at the National University “Lviv Polytechnic”.
State Enterprise “STC” “Precision Mechanics Plant”, which is the part of the GC ”Ukroboronprom“ has finished the state order ahead of schedule in the last year of 2015. In this regard, the Defense Ministry of Ukraine gave a supplementary task, which the enterprise accomplished within the shortest time period. The covenants set up in the contracts were accomplished in full extent. The plant has fully utilized the production capacity and had the record production level.
December 23 on the territory of one of the factories of the SE «Kyiv armored Factory” the direction of the SC “Ukroboronprom” held a unique press conference: a detailed report on the activities of the Concern and its participating enterprises during 2015, as well as the strategy of the development for the upcoming years.
Over the past four months STC State Enterprise ” Precision Mechanics Plant “, which is part of the SC “Ukroboronprom”, increased production volume of military equipment in almost 20 times!
The plant has fully involved the production capacities and had the record production volumes. For example, the number of the produced link L-30-1 was 19,500 in 2014, in 2015 it was 390,767 links!
From 2 to 5 November 2015 the annual international exhibition “Defense & Security 2015” was held in Bangkok.
Thai high-ranking Ministries of Defense acquainted with samples of the latest developments of Ukrainian defense industry, represented by SC “Ukroboronprom”, including some products of SE STC “Precision Mechanics Plant” – such as guns PMP-1, PMP-2 and L-link 30-1.
November 3 2015 the “Precision Mechanics Plant”, which is part of the State Concern “Ukroboronprom», produced the anniversary 700th cannon FMP-1.
Enterprise Scientific-Technical Complex “PMP” was founded in 1996 under the decree of the Minister of Industrial Policy of Ukraine as a specialized enterprise on the development and production of the gunnery-oriented weapons. The plant has positioned itself as a manufacturer of the unique qualitative counterparts of the Soviet weapons and is the only plant in Ukraine, which produces the gunnery with a caliber equal to 30 mm.
September 25 2015, on the occasion of the professional holiday – the Day of machine builder of Ukraine, the Department of Economic Development and Trade in Khmelnitsky held a solemn handing of diplomas to the staff of SE STC “Precision Mechanics Plant».
From 22 to 25 September 2015 the International Exhibition Center in Kiev hosted international specialized exhibition “Arms and Security”. One of the largest and most presentable stand was well-known public concern “Ukroboronprom” consisted of 29 companies that participated in the event. Production of the association was presented by a wide range of artillery, communications and automated control, ammunition, unmanned reconnaissance aircraft, anti-tank missiles and much more.
Enterprises offloaded 35 weapons in a month, said the Ukroboronprom.
Over the past month the Ukroboronprom`s enterprises achieved their record – they offloaded 35 guns, said the press service.
May 11 state concern “Ukroboronprom” demonstrated to the State leadership the quality and reliability of modern armament and military equipment samples.
Petro Poroshenko and NSDC Secretary Alexander Turchinov visited polygon 169 of the training center “Desna” of the Land Forces of Ukraine (Chernihiv region.), where was presented the technics of the enterprises-participants and partners of “Ukroboronprom”, including “Factory Precision Engineering”. Continue reading “The President of Ukraine examined the weapons and armor developed by the “Ukroboronprom`s” enterprises”
A demonstration showing samples of weapons and military equipment was held on Saturday, April 4, in the village Novi Petrivtsi of Kyiv region with the participation of President Poroshenko. Prime Minister Arseniy Yatseniuk, Chairman of the National Security Council Alexander Turchinov, Defense Minister Stephen Poltorak, head of the SSU Valentin Nalyvaychenko and Minister of Internal Affairs of Ukraine Arsen Avakov also took part in the review of the technique with the President.
23-24 February 2015 State Concern “Ukroboronprom” presented Ukraine at the International exhibition of military equipment «IDEX-2015″. The delegation was led by Director General of Concern Roman Romanov and the National Security Council Deputy Secretary Oleg Hladkovskyy. Continue reading “PMP at the largest international exhibition of defense armaments in Abu-Dhabi”